CTM Potters Supplies - if you use clay you need CTM

Doncaster Tel: 01709 770801

Simba Materials Limited t/a

CTM Potters Supplies Co Reg No 05659119

   Doncaster Fax : 01709 770803

doncaster@ctmpotterssupplies.co.uk CTM Potters Supplies - Doncaster, Unit 8 Broomhouse Lane Industrial Estate, Edlington, Doncaster DN12 1EQ

Delivery charges and VAT will be added on to all orders. Prices on this website and in all downloads are net of VAT. Prices are subject to change without notice.

Exeter Tel: 01395 233077

   Exeter Fax : 01395 233905

admin@ctmpotterssupplies.co.uk CTM Potters Supplies - Exeter, Unit 10A Mill Park Industrial Estate, White Cross Road, Woodbury Salterton EX5 1EL

All prices are in GBP - often per kg - and need delivery and VAT to be added. For some items there are pictures or more information if you press on the link. You can order by email, phone, fax but but you cannot pay online - please see ORDERING

Please Note

Bisque Tiles

  • BW1   4" Bisque Tiles
  • English Handmade Tiles
  • 98 mm x 98 mm x 5.3 mm
  • slight taper to the edge
  • some raised area on the back to help with grouting
  • £0.80 each  + VAT
  • £0.75 each + VAT for 10+


  • BW2   6" Bisque Tiles
  • English Handmade Tiles
  • 153 mm x 153 mm x 6 mm
  • slight taper to the edge
  • some raised area on the back to help with grouting
  • £1.10 each +VAT
  • £1.05 each + VAT for 10+




  • BW2A   3.5" Coaster
  • English Handmade Tiles
  • 89 mm x 89 mm x 4 mm
  • slight taper to the edge
  • some raised area on the back to help with grouting
  • £1.10 each  + VAT
  • £1.05 each + VAT for 10+
Delivery Charges

We stock a small selection of West Country handmade bisque - domestic and decorative; hand made English bisque tiles; and a range of press moulds. We do not stock slip moulds nor have facilities to make other moulds or bisque.


Due to their fragility they may take up more boxes than you think - when possible we prefer customers to collect these or to send them out on a pallet.

For Bisque Ware - Domestic and Decorative, and for Press Moulds use this link

Although can be fired higher - we recommend firing between 1000oC and 1220oC to prevent shrinkage or warping.  If firing higher we recommend you test first to check shrinkage and warping rate.

PRICE LIST