Doncaster Tel: 01709 770801

Simba Materials Limited t/a

CTM Potters Supplies Co Reg No 05659119

   Doncaster Fax : 01709 770803

doncaster@ctmpotterssupplies.co.uk     Unit 8 Broomhouse Lane Industrial Estate, Edlington, Doncaster DN12 1EQ

Delivery charges and VAT will be added on to all orders. Prices on this website and in all downloads are net of VAT. Prices are subject to change without notice.

Exeter Tel: 01395 233077

   Exeter Fax : 01395 233905

admin@ctmpotterssupplies.co.uk            Unit 19 Hogsbrook Units,Greendale Ind Estate EAST, White Cross Road, Woodbury Salterton, Exeter EX5 1PY

All prices are in GBP - often per kg - and need delivery and VAT to be added. For some items there are pictures or more information if you press on the link. You can order by email, phone, fax but but you cannot pay online - please see ORDERING

Please Note

Handbuilding  Starter Kits

HB Starter Kit A      £58.00 + VAT = £69.60

HB Starter Kit B      £48.45 + VAT = £58.14

Suggested Clay       £17.70 + VAT = £21.24

Total Kit Price     £124.15 + VAT = £148.98

Plus delivery if not collected

We stock a wide range of cost effective tools, brushes and equipment from Germany, Spain, Taiwan, USA and made in the UK for hobbyist, professional and schools. We buy in bulk so often have very good prices.

Handbuilding Starter Kit A

• T1010 Tool Roll £5.50
• T1001 Fine Ceramic Tool Set £10.50
• RPL Large Rolling Pin £8.25
• RPG6 6 mm Rolling Guides - pair £2.65
• RPG9 9 mm Rolling Guides - pair £2.65
• RPG12 12 mm Rolling Guides - pair £2.65
• RPH3  Hessian Cloth 1800 x 600 mm £5.70
• S6 Small Round Sponge £1.50
• S5 Coffee Pot Sponge £2.20
• T72 Steel Cutting Harp with 12” Wire £20.85
• T74 Clay Cutter Wiggly Wire £2.07
• T70 Clay Cutter 18” Thin Wire £1.50

List Price £66.02 + VAT = £79.22

Kit A Price £58.00+ VAT = £69.60

Handbuilding Starter Kit B

• 
  
• T68 Double Ended Bevel Cutting Tool £4.30
• C39 Hand Held Extruder with 5 dies 220 mm x 50 mm tube £29.80
• TPRH Handle for Rollers £4.45
• Choice of Three of the 7” Textured Pattern Rollers at £5.05  each = £15.15

List Price £53.70 + VAT = £64.44

          Kit B Price £48.45 + VAT = £58.14

Suggested Handbuilding Clay

• E/S 40 Handbuilding Clay 1200-1300oC
• Graded molochite giving low thermal expansion, high resistance to thermal shock, warping and cracking. Large sculptures, large slabs, coiling and handbuilding. Stoneware, raku and reduction firing.
• 12.5 kg bag    List Price £20.80 + VAT

If added to Starter Kit the Price is £17.70 + VAT

Both kits and one bag of E/S40 at

special price £124.15 + VAT = £148.98

Alternative Clay : V9 Grogged 1140-1280oC

• 12.5 kg bag     List Price £8.98 + VAT

          If added to Starter Kit the Price is £7.39 + VAT

The largest 13 amp plug in kilns that we supply that fire to full stoneware (price includes shelves, controller):-

Rohde HIM-Ecotop 43 1320oC ST310 controller + 3 shelf set

New High Insulation Model

CTM Discounted GBP 2,893.65 incl VAT (40cm x 34cm deep)

Rohde HIM-Ecotop 60 1320oC ST310 controller + 4 shelf set

New High Insulation Model

CTM Discounted GBP 3,210.45 incl VAT (40cm x 34cm deep)

Nabertherm TOP 45/L 1300oc 5 programme controller + 3 shelf set

CTM Discounted Price £2,682 including VAT

(41cm x 34cm deep)

Kilncare V61 IKON 1300oc 32 programme controller + 3 shelf set

CTM Price £3,384 including VAT and delivery

(41cm x 45cm deep)

Optional pallet delivery is by tail lift vehicle to road side only.